Hitachi CB 520H A1 User Manual page 446

ID
010030BC "Set the virtual COM console
functionality (and specified the VC
number). LPARxxx Value:xxx"
010030BE "Set the virtual COM console
functionality (and specified the VC
number). LPARxxx Value:xxx"
010030BF
"Failed to set the virtual COM console
functionality (and specified the VC
number). LPARxxx Value:xxx"
010030C0 "Set the time mode of logical SEL time
for the LPAR. LPARxxx Value:xxx"
010030C1 "Failed to set the time mode of
logical SEL time for the LPAR. LPARxxx
Value:xxx"
010030C2 "Set the time zone of logical SEL time
for the LPAR. LPARxxx Value:xxx"
010030C3 "Failed to set the time zone of
logical SEL time for the LPAR. LPARxxx
Value:xxx"
010030C4 "Connected to the guest screen for the
LPAR. LPARxxx"
010030C5 "Failed to connect to the guest screen
for the LPAR. LPARxxx"
010030C6 "Disconnected from the guest screen
for the LPAR. LPARxxx"
010030C7 "Failed to disconnect from the guest
screen for the LPAR. LPARxxx"
010030C8 "Requested to assign the processor
group to the LPAR. Accept:xxx LPARxxx
ProcessorGroupxxx"
9-70
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Message
Messages
Operation for which an audit log is
collected
communication packet filtering and the
request fails
When HvmSh and so on is used to request
setting change of the virtual COM console
functionality for an LPAR and the request
immediately succeeds
When the LPAR manager screen is used to
request setting change of the virtual COM
console functionality for an LPAR and the
request succeeds
When the LPAR manager screen is used to
request setting change of the virtual COM
console functionality for an LPAR and the
request fails
When the LPAR manager screen is used to
request setting change of the SEL time mode
for an LPAR and the request succeeds
When the LPAR manager screen is used to
request setting change of the SEL time mode
for an LPAR and the request fails
When the LPAR manager screen is used to
request setting change of the SEL time mode
for an LPAR and the request succeeds
When the LPAR manager screen is used to
request setting change of the SEL time mode
for an LPAR and the request fails
When the LPAR manager screen is used to
request switch from the LPAR manager
screen to the guest screen and the request
succeeds
When the LPAR manager screen is used to
request switch from the LPAR manager
screen to the guest screen and the request
fails
When the LPAR manager screen is used to
request switch from the LPAR manager
screen to the guest screen and the request
succeeds
When the LPAR manager screen is used to
request switch from the LPAR manager
screen to the guest screen and the request
fails
When HvmSh and so on is used to request
change of processor group for an LPAR and
the request is accepted