Hitachi CB 520H A1 User Manual page 382

Message Content
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
9-6
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
LP-Loader could not find VfcSeed.dat in management
The switching N+M t might be failed, check the BSM error. When
there is no error, Contact the reseller from which you purchased
this equipment or consult maintenance personnel.
LP-Loader could not update OEM FRU.
Updating the Vfc seed information to FRU failed when the N+M
was performed.
There is a possibility that the BMC error occurred or FRU data is
damaged.
Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
LP-Loader detected a value of Emulex NIC(Bus:0xXX)
Personality unsupported for this LP. Please reset Emulex
NIC Personality to a value supported for the LP.
LPAR manager cannot start because a value not supported by
LPAR manager is set for the Personality for Emulex NIC.
Set a value supported by LPAR manager for the Personality.
For details about setting the value, see the Hitachi Compute Blade
Emulex Adapter User's Guide for Hardware.
Note that this value cannot be changed in LP mode. If necessary,
change the value in Basic mode.
LP-Loader detected configuration error in management
path portX, [Code:X SlotType:XX BladeNo:XX SlotNo:XX
A configuration error in the management path was detected.
Check whether there are any problems in the management path
configuration and settings.
Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
LP-Loader detected an unsupported NIC. (Bus:0xXX, Dev:
0xYY, Fnc:0xZZ) Please Power Off Partition.
YY: Device number
ZZ: Function Number
An unsupported NIC is detected. So, the LPAR manager boot is
suppressed.
Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
Messages
module.
XX: Bus number
PortNo:XX].
XX: Bus number