Notation Used In Audit Log Messages; List Of Audit Log Messages - Hitachi CB 520H A1 User Manual

Notation used in audit log messages

Item
xxx •
•
•
LPARxxx
•
ProcessorGroupxxx •
•
•
Rolexxx
•

List of audit log messages

Table 9-2 List of audit log messages (Authentication)
ID
01001000 1 When the Virtual COM console is used:
.
"Logged in to the LPAR manager.
Username:xxx Session ID:xxx Source
IP address:xxx Method:xxx LPARxxx
VC:xxx Destination port:xxx"
2 When the LP Web system or the HvmSh
.
is used:
"Logged in to the LPAR manager.
Username:xxx Session ID:xxx Source
IP address:xxx Method:xxx
Destination port:xxx"
01001001
"Failed to login to the LPAR manager.
Username:xxx Source IP address:xxx
Method:xxx"
01001002
"Logged out from the LPAR
manager.Username:xxx Session ID:xxx
Source IP address:xxx Method:xxx"
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Table 9-1 Notation used in audit log messages
The parameter value is output.
If there is no applicable value, "*" is output.
The LPAR number and LPAR name are output, separated by a colon (:).
(Example: "LPAR1:NO_NAME")
If there is no applicable LPAR, "LPAR*" is output.
The processor group number and processor group name are output, separated
by a colon (:). (Example: "ProcessorGroup0:NO_NAME")
If an undefined processor group number is specified, an asterisk is output
instead of the processor group name. (Example: "ProcessorGroup10:*")
The role number and role name are output, separated by a colon (:).
(Example: "Role0:Administrators")
If an undefined role number is specified, an asterisk is output instead of the
role name. (Example: "Role5:*")
Message
Description
Operation for which an audit log is
When the login to LPAR manager succeeds
When the login to LPAR manager fails
When the logout from LPAR manager
completes
Messages
collected
9-57