Hitachi CB 520H A1 User Manual page 326

Item
NTP Server
1~2
Legend:
Y: Can be changed
N: Cannot be changed
C: Can be changed with conditions.
How to switch the time display
Place the cursor on Select Display at the upper right side and press Enter to
display a sub-screen for selecting the displayed time. Place the cursor on the
time to display and press Enter.
How to change the SEL time mode of the LPAR
The SEL time mode can be changed only when the relevant LPAR is
deactivated.
Specifying "GMT" does not add the SEL time zone to the SEL time. Specifying
"Local-Time" adds the SEL time zone to the SEL time.
Place the cursor on Select Display at the upper right side and press Enter to
display a sub-screen for LPAR SEL Time, and press Enter. The SEL time of
the LPAR appears.
Place the cursor on the Time Mode column of the LPAR line to change the SEL
time mode and press Enter. The sub-screen for selecting the SEL time mode
appears. Select SEL time mode and press Enter.
How to change the SEL time of the LPAR
The SEL time can be set only when the relevant LPAR is deactivated. Place
the cursor on Select Display at the upper right side and press Enter to
display a sub-screen for selecting the time to display.
Place the cursor on LPAR SEL Time and press Enter. The SEL time of the
LPAR appears. Place the cursor on the Date and Time column of the LPAR line
to change the SEL time and press Enter. The sub-screen for selecting the
SEL time appears. Select SEL time, and press Enter.
How to change the SEL time zone of the LPAR
The SEL time zone can be set only when the relevant LPAR is deactivated.
Place the cursor on Select Display at the upper right side and press Enter to
display a sub-screen for selecting the time to display.
7-88
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
LPAR Status
Activate Deactivate
Y Y
Operation by LPAR manager Screen
Remark
Failure
Y -
Supported
LPAR
manager
Version
01-0X~