Hitachi CB 520H A1 User Manual page 396

Message Content
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
9-20
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
NTP server is not set.
Stop a time-getting of NTP server
Set the IP address of a NTP server to NTP Server 1 or NTP server
2.
NUMA configuration error.
Set processor scheduling mode to dedicated and bind
logical processor to physical processor manually.
The guest NUMA configuration is invalid.
Set the scheduling mode of the processor to dedicated mode, and
then allocate a physical processor to the logical processor.
Aborts the specified process.
Set the scheduling mode of the processor to dedicated mode, and
then allocate a physical processor to the logical processor.
Operation failed because system configuration is being
The operation was not accepted because the LPAR manager
configuration information is now being saved.
Aborts the specified process.
Wait a while, and then retry the specified process.
Over Max VLAN ID count (16).
The number of the specified VLANID exceeds 16.
Either automatically modifies the number of specified VLANID to
be less than 16, or keeps the message sub-screen on the terminal
display until ESC key is pressed.
Change the number of VLANID to be less than 16, or cancel the
VLANID setting operation by pressing ESC key.
Over the maximum number of activated LPARs (X).
The LPAR cannot be activated because it is beyond the max
number (X) of LPARs to activate with Essential model, Advanced
model, and Enterprise model.
Aborts the LPAR activation.
Deactivate an LPAR currently activated, and then activate the
LPAR again.
Messages
updating.