What You Can Do On The Boot Menu - Hitachi VisionBase 8880R Product Manual

Ch 2: System Environment Setting

What You Can Do on the Boot menu

Specify the priority of devices to boot/load. To change priority, move the cursor to the device, then use
–
keys. It is recommended to use the following defaults:
Diskette Drive
1.
Hard Drive
2.
ATAPI CD-ROM Drive
3.
Symbios Logic CD-ROM
4.
Pressing Esc key while "Press <F2> to enter SETUP" is being displayed will start the boot device selection menu.
Under ordinary circumstances, do not press
NOTE: When PC98-compatible SCSI boards such as PC-CS7331 or PC-CS7231A are installed, more devices
might be displayed.
Hard Drive (IDE Hard Disk Drive)
Used to specify the order of booting for the hard disk. Check whether the display is the same as the following:
Bootable Legacy Device
1.
NOTE: When PC98-compatible SCSI boards (such as PC-CS7331 or PC-CS7231A) or IDE devices are installed,
more devices might be displayed.
An incorrect setting in Hard Drive will disable the OS to be started.
34
PhoenixBIOS Setup Utirity
Main Advanced Security Boot
1. [Diskette Drive]
2. [Hard Drive]
3. [ATAPI CD-ROM Drive]
Hard Drive
↑↓ Select Item
F1 Help -/+
←→ Select Menu
ESC Exit
Figure 23 Boot Menu Screen
key.
Esc
Exit
Item Specific Help
Change Values F9 Setup Defaults
Enter Select Sub-Menu F10 Save and Exit
+
Hitachi VisionBase 8880R Server
and