Config: Ip Snmp Traps Community; Config: Ip Snmp Traps Version; Config: Ip Snmp Traps Address; Config: Ip (Ethernet) Switch Set-Up - Comtech EF Data CDM-625 Installation And Operation Manual

CDM-625 Advanced Satellite Modem
Front Panel Operation
CONFIG: IP
SNMP Traps Community:
Comtech
This menu permits the user to edit the SNMP Traps Community string. Only the first 20
characters on the bottom line are available. Use the
edit. Use the
▲ ▼
are available with the exception of the backslash (ASCII code 92) and ~ (ASCII code 126).
When the user has composed the string, press ENTER. All trailing spaces are removed from the
Community string upon entering.
CONFIG: IP
SNMP Traps Version:
Select the version using the
CONFIG: IP
Trap IP addr #1:
This menu permits the user to edit the Trap Destination's IP Address.
◄ ►
Use the
of the character. If both Trap IP Address are 000.000.000.000, it means Trap is disabled.
5.4.13.3 CONFIG: IP
Ethernet Switch:
Select using the
CONFIG: IP
Ethernet Switch Mode:
Use the ◄ ► arrow keys to select the Switch mode, then press ENTER. Note: VLAN is not
supported in this release.
SNMP Traps
arrow keys to edit the value of the character. All printable ASCII characters
SNMP Traps
SNMP-ver1 (ver1,ver2)
arrow keys, then press ENTER.
▲ ▼
SNMP Traps
000.000.000.000
arrow keys to select the character to edit. Use the
(Ethernet) Switch Set-up
Mode
◄ ► arrow keys, the press ENTER.
(Ethernet) Switch Set-up
Simple-Bridge
Community
(20 chars)
◄ ► arrow keys to select the character to
Version
Address
Stats
Mode
VLAN
5–44
MN-0000036 (Ref MN/CDM625.IOM)
(34v)
(v)
(34v)
arrow keys to edit the value
▲ ▼
(34)
(34)
Revision 1