Odu: Fsk-Control - Comtech EF Data CDM-625 Installation And Operation Manual

CDM-625 Advanced Satellite Modem
Front Panel Operation

ODU: FSK-control

HPA:Off
LNA:OFF
◄ ►
Use the arrow keys to select the parameter to edit, then use the
parameter. Press ENTER to implement, or CLEAR to cancel and return to the previous menu.
HPA state
Fault-Logic
LNA state
Fault-Logic
CAL
5.10.8.2 ODU: FSK-control
KST Info:
Use the ◄ ► arrow keys to select the type of information to view, then press ENTER.
ODU: FSK-control
MODEL:
Press ENTER or CLEAR to return to previous menu.
ODU: FSK-control
Info: Tx:Off
Press ENTER or CLEAR to return to previous menu.
ODU: FSK-control
Info:
KST
Fault-Logic=Summary
Fault-Logic=Summary
HPA power enable. Select Off or On.
This controls whether or not a HPA fault is indicated on the Fault status, and
activates the Summary Fault Relay. Select Summary or No-Summary.
LNA power enable. Select Off or On.
This controls whether or not a LNA fault is indicated on the Fault status, and l
activates the Summary Fault Relay. Select Summary or No-Summary.
To calibrate, select YES and press ENTER. Calibration allows the system to
determine nominal LNB or LNB power consumption, performed at initial
installation only. (Default is NO.)
Model
KST
KST-2000B
HPA: CEFD-SSPA
KST
13955MHz
Rx: 11950MHz
KST
HPA:Off
Band:B LNA:Off
Configuration
KST Information
Tx+Rx-Param
Misc Numbers
Information
Information
10dB
20dB
Information
Flt-Logic:No-Summ
FLT-Logic:Summary
5–71
MN-0000036 (Ref MN/CDM625.IOM)
Miscellaneous
Cal:No
arrow keys to edit the
▲ ▼
(34)
Model
Tx+Rx-Param
Ref:087
Misc
Revision 1