Figure 6-7. Config | Modem Page - Comtech EF Data CDM-625 Installation And Operation Manual

CDM-625 Advanced Satellite Modem
Ethernet Management
6.5.4.3.2 Config | Modem
The 'Config | Modem'
param eters including:
•
•
The Tx / Rx Interface Types and Framing Modes have higher priority than
parameters, and should be configured before setting other parameters.
IMPORTANT
For details pertaining to the configu
F RONT PANEL OPERATION.
Once the desired configuration settings have been made in
[Submit] as needed in that section to save those changes.

Figure 6-7. Config | Modem page

page (Figure 6-7) is used to configure modem operating (Tx / Rx)
Tx / Rx Interfaces and Framing
Carrier-in-Carrier (CnC) Parameters.
ration parameters available on this page, refer to Chapter 5.
MN-0000036 (Ref MN/CDM625.IOM)
each section, the user should then click
6–14
Revision 1
other