CDM-625 Advanced Satellite Modem
Front Panel Operation
5.6.2
Monitor: Stored Events
Stored Events:
#199 FT- Frame Sync
An example of a Stored Events screen is shown.
◄ ►
Use the
arrow keys to select the '#' character on the lower line, then the user can use the
using the
▲ ▼
or CLEAR will take the user back to the previous menu. The event log can store up to 255
events. When a fault condition occurs, it is time- & date-stamped and put into the log. Similarly,
when the fault condition clears, this is also recorded.
Use the
◄ ►
arrow keys to select Clear-All. Use the
then press ENTER. If the user selects Clear-All=Yes, the event log is cleared and the user is
taken directly back to the previous menu. However, if there already are faults present on the unit
at this time, they will be re-time-stamped, and new log entries will be generated.
Note that, in accordance with international convention, the date is shown in DAY-MONTH-
YEAR format.
Clear-All: No
arrow keys to scroll up and down through the event log entries. Pressing ENTER
MN-0000036 (Ref MN/CDM625.IOM)
(No,Yes)
25/10/07 16:25:24
arrow keys to change to Yes or No
▲ ▼
5–50
Revision 1
,
Need help?
Do you have a question about the CDM-625 and is the answer not in the manual?