Config: D&I Insert Channel Timeslots - Comtech EF Data CDM-625 Installation And Operation Manual

CDM-625 Advanced Satellite Modem
Front Panel Operation
5.4.6.2 CONFIG: D&I
Ins-Ch:
Select the Channel to edit using the
arrow keys, then press ENTER.
The number of Channels depends on the data rate. If the data rate is 1920 kbps, then only the E1
formats are available and the Chan/TS menus are disabled. This is the 'Fixed Channel Mode'
where all timeslots are allocated in order.
If the framing is D&I and Drop/Insert Type is E1-CAS, Timeslot 16 is completely used for CAS
signalling and therefore may not be allocated by the user for traffic data.
Insert Channel Timeslots
1 2 3
TS: 01 02 03
◄ ►
MN-0000036 (Ref MN/CDM625.IOM)
4 5
04 na
arrow keys, edit the timeslot value using the
5–27
Revision 1
▲ ▼