Table of Contents
Advertisement
CDM-625 Advanced Satellite Modem
Remote Control
Command
Parameter
Number of
(Instruction
Type
Arguments
& Qualifier)
Configuration
CST=
1 byte, value of 0
Save
thru 9
Configuration
CLD=
1 byte, value of 0
Load
thru 9
Bulk Status
N/A
29 bytes
Query
Exception:
600/L
28 chars, as RFO
is different
Description of Arguments
Command only.
Command causes the modem to store the current modem
configuration in Configuration Memory location defined by the
one-byte argument (0 to 9).
Example: CST=4 (store the current configuration in location 4)
Command only.
Causes the modem to retrieve a previously stored modem
configuration from Configuration Memory location defined by the
one-byte argument (0 to 9).
Example: CLD=4 (load modem configuration from location 4 to be
the active configuration)
Query only.
The response has the format:
abcccc,ddddd,eefffffggggghhh,
where:
a is as LRS? response
b is as RED? response
cccc is as EBN? response
ddddd is as BER? response
eeeee is as BFS? response
*
ffffff is as RFO? response
ggggg is as RSL? response
hhh is as TMP? response
This command is intended to reduce the need for excessively
frequent queries to a modem, and will be useful for a unit in a
redundancy system, where the redundancy system has
monitoring of its own occurring. The latter 6 parameters are only
updated once per second.
D–42
Revision 1
MN-0000036 (Ref MN/CDM625.IOM)
Query
Response to
(Instruction &
Response to Query
Command
Qualifier)
CST=
N/A
N/A
CST?
CST*
CST#
CLD=
N/A
N/A
CLD?
CLD*
CLD#
N/A
BSQ?
BSQ=abcccc,ddddd,ee
ffffffggggghhh
(see description of
arguments)
Advertisement
Table of Contents
