Selecting A Call Channel - Icom IC-7100 Instruction Manual

Previous view
11
MEMORY OPERATION

Selecting a Call channel

Two Call channels (C1/C2) are selectable in each of the
144 and 430 MHz frequency bands.
Factory default frequencies and operating modes are
programmed into the Call channels. Change these to
suit your operating needs. (see page ??)
q
Select the 144 or 430 MHz frequency band. (p. ??-
??)
w
Push (L) to select the Call channel of the
TUNER/CALL
selected frequency band.
• "CALL1" appears.
• Rotate [M-CH] to select "CALL2."
e
Push (L) again to return to the previous
TUNER/CALL
screen display.
TUNER/CALL
While in the Call channel mode
11-4
Appears