Memory/Call Operation; General Description; Selecting A Memory Channel; Selecting The Call Channel - Icom IC-V82-T Instruction Manual

■ General description

The transceiver has 207 memory channels including 6 scan
edge memory channels (3 pairs), and 1 call channel. Each
of these channels can be individually programmed with op-
erating frequency (pgs. 13, 14), duplex direction (p. 17) and
offset (p. 18), subaudible tone encoder or tone squelch and
its tone frequency (pgs. 18, 35) and skip information* (p. 32).
*except for scan edge memory channels.

■ Selecting a memory channel

q Push [C•
] to select memory mode.
MR
• " X " appears.
C
Push
MR
wEnter 2 digits to select the desired memory channel (or
push the [Y Y ]/[Z Z ] keys).
• The memory channels 0–9 are proceeded by a "0."
• When [VOL] is assigned as tuning dial, rotate [VOL] to select
the memory channel. (pgs. 14, 65)
1 2
Push
TONE P.BEEP

MEMORY/CALL OPERATION

In addition, a total of 10 memory banks, A to J, are available
for usage by group, etc.

■ Selecting the call channel

➥ Push [B•
CALL
• "C" is displayed instead of the memory channel number.
• Push [D•
CLR
tively.
Push
] to select the call channel.
] or [C• ] to select VFO or memory mode, respec-
MR
B
CALL
"C" appears
6
5
6
21