Meter Peak Hold Function - Icom IC-7100 Instruction Manual

Previous view
5
FUNCTIONS FOR RECEIVE

Meter peak hold function

The Meter Peak hold function is set to ON by default,
the peak level of a received signal strength or the out-
put power is displayed for approximately 0.5 seconds.
The function can be turned OFF in the "Meter Peak
Hold" item of the "Display" Set mode. (p. 165)
q
Push (C) to enter the Set mode.
SET
w
Touch the "Meter Peak Hold" item of the "Display"
Set mode.
Display > Meter Peak Hold
• If the specifi ed item is not displayed, touch [Y] or [Z](D)
one or more times to select the page.
e
Touch the desired option to turn ON or OFF the Me-
ter Peak Hold function.
r
Push (C) to exit the Set mode.
SET
L eft D isplay R ight
C enter
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
5-13
Appears for 0.5 seconds.
Push SET
Touch "Display"
Touch
"Meter Peak Hold"
Touch the option
Example: OFF