Icom IC-7100 Instruction Manual page 14

Previous view
1
PANEL DESCRIPTION
Front panel (Controller) (Continued)
D
Display
q w e
@2 MEMORY CHANNEL READOUT (p. 100)
➥
Shows the selected memory channel, scan edge
channel or Call channel.
• Memory bank indicator (A to E) appears to the left of
memory channel.
➥
Touch to toggle between the VFO and Memory
modes.
@2 SELECT MEMORY CHANNEL ICON
"" appears when the selected memory channel is
set as a select memory channel. (p. 151)
@3 MULTI-FUNCTION METER INDICATION
➥ Displays the signal strength while receiving.
➥ Displays the relative output power, SWR, ALC or
compression levels while transmitting.
➥ When the Meter Peak Hold function is ON, the
peak level of a received signal strength or the
output power is displayed for approximately 0.5
seconds.
➥ Touch to select the RF power, SWR, ALC or Com-
pression meter.
➥ Touch for 1 second to display the Multi-function
meter.
r t y u i
1-10
o
!0
!1 !2
@1
@2
@0 !9 !8
@3
@4
@5
@4 INFORMATION READOUT (p. 80)
Displays the transmit frequency of the Split opera-
tion, descriptions of the memory channel or Re-
ceived Call sign on the DV mode, and so on.
@5 FUNCTION DISPLAY (p. 19)
Shows the function of the Touch keys.
• Push to change the set of functions assigned to
MENU
touch keys.
• Toggles the function display menu between M-1 (M-1
menu), M-2 (M-2 menu), M-3 (M-3 menu), D-1 (D-1
menu) and D-2 (D-2 menu).
!3 !4 !5
!7 !6