D About The Fine ∂F Scan - Icom IC-7100 Instruction Manual

Previous view
12
SCAN OPERATION
∂F scan and Fine ∂F scan (VFO mode/Memory mode) (Continued)
D ∂F scan
About the Fine
When a signal is received during a Fine ∂F scan, the
scanning tuning step is temporarily set to 10 Hz and the
scan speed decreases.
q ∂F scan.
Start
• Follow steps q through u as described on page ??-??.
w
While scanning, touch [FINE](
function between ∂F scan and Fine ∂F scan.
e ∂F](D) to cancel the scan.
Touch [
D) to switch the scan
12-15
L eft D isplay R ight
C enter
While ∂F scanning
While Fine ∂F scanning
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
Touch [FINE]
Touch [FINE]