D Setting/Cancelling Select Memory Channels - Icom IC-7100 Instruction Manual

Previous view
12
SCAN OPERATION
Memory scan (Memory mode) (Continued)
D
Setting/Cancelling Select Memory channels
All Memory channels can be set as Select Memory chan-
nels, except for the Scan Edge and Call channels.
➥
When the "SCAN" screen or the "MEMO" screen
(Memory Menu) is displayed, touch [SEL] to set or
cancel the displayed Memory channel as a Select
Memory channel.
• "" appears when the channel is set as a Select Memory
channel.
• An error beep sounds when the displayed Memory chan-
nel is a blank channel.
[SEL]
• Touching for 1 second displays "SELECT ALL
Clear?." Touch [YES](F-4) to clear all Select Memory
channel settings.
L eft D isplay
C enter
"SCAN" screen
When the channel is set as a Select
Memory channel.
"SELECT ALL Clear?" screen
[SEL]
After touching
to clear all Select Memory channel
settings.
12-13
The L, R, C or D in the
R ight
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
Appears
for 1 second