Memo Pad Function; D Writing The Displayed Contents Into The Memo Pads - Icom IC-7100 Instruction Manual

Previous view
11
MEMORY OPERATION

Memo pad function

The transceiver has a Memo pad function to store the
displayed content for easy writing and recalling. The
Memo pads are separate from the Memory channels.
The default number of Memo pads is 5. However, you
can increase the number to 10 in the "Memopad Num-
bers" item of the Set mode, if desired. (p. ??-??)
D
Writing the displayed contents into the Memo pads
You can store the displayed content by pushing
(R).
When you store content of the 6th Memo pad, the old-
est stored content is automatically erased, to make
room for the new content.
NOTE: Each Memo pad must have its own unique
content; Memo pads having identical content cannot
be written.
Operating frequency of the VFO
or Memory mode
In this example, 21.347.24 MHz (USB) will be
erased when 21.280.00 MHz (USB) is written.
Memo pads are convenient when you want to memo-
rize the displayed content temporarily, such as when
you fi nd a DX station in a pile-up, or when a desired
station is busy for a long time and you want to tempo-
rarily search for other stations.
Use the transceiver's Memo pads instead of relying on
hastily scribbled notes that are easily misplaced.
L eft D isplay
MPAD
C enter
Memo pads
MPAD
Erased
11-13
The L, R, C or D in the
R ight
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
Newest
Oldest