Icom IC-7100 Instruction Manual page 95

Previous view
11
MEMORY OPERATION
Programming a Memory channel (Continued)
D
Checking the programmed Memory con-
tents
The programmed Memory channels can be checked on
the "MEMORY LIST" screen.
q
When the "M-3" (Menu 3) screen is selected, touch
[MEMO](D) to display the "MEMO" (Memory)
screen.
w L) to select the Memory bank (A to
Rotate [BANK](
E) to be checked.
e D) to display the "MEMORY LIST"
Touch [LIST](
screen.
• Touch [∫] or [√](D) to select the displayed page.
• The Program Scan Edge Memory channels can be
checked on any band screen.
D
Checking the Memory contents pro-
grammed in the DR mode
q
Push one or more times to cancel the DR
DR
mode.
w
Touch the Memory channel number indication once
or twice to select the Memory mode. (p. ??-??)
• The access repeater call sign and the destination call
sign appear.
When the "M-2" (Menu 2) screen is selected, touch
[CS](D) to display the call sign programmed in the
selected channel.
✓
For your reference
"FROM" and "TO" names are automatically programmed
as the Memory name.
• The Memory name is not overwritten when the memo-
ry contents are programmed into the preprogrammed
channel.
L eft D isplay
C enter
Access repeater
call sign
Destination call
sign
11-7
The L, R, C or D in the
R ight
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
"MEMORY LIST"
screen of
Bank A.