D Full Break-In Operation - Icom IC-7100 Instruction Manual

Previous view
6
FUNCTIONS FOR TRANSMIT
Break-in function (Continued)
D
Full Break-in operation
During Full Break-in operation, the transceiver trans-
mits when you key down, then immediately returns to
receive when you release.
q
On the Mode selection screen, select the CW or
CW-R mode. (p.3-??)
w
Push (C) one or more times to select the
MENU
"M-3" screen (M-3 menu).
e D) one or more times to turn ON the
Touch [BK-IN](
Full Break-in function.
• "F-BKIN" appears.
L eft D isplay R ight
C enter
When using a paddle:
Adjust the keying speed while operating a paddle.
q
Push (C) to open the Key speed/CW pitch
SPEED/PITCH
adjustment window.
w
Rotate [M-CH] (L) to adjust the Key speed.
• The adjustable key speed is between 6 and 48 wpm
(words per minute).
e
Push (C) to close the window.
MENU
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
6-4
Full Break-in icon
[M-CH]
SPEED/PITCH
Touch [BK-IN]