Icom IC-7100 Instruction Manual page 176

Previous view
17
SET MODE
Set mode items and Default settings (Continued)
NOTE: The default settings shown below in bold are for the USA version.
The default settings may differ, depending on your transceiver version.
Others
Information
Version
Clone
Clone Mode
Clone Master Mode
Touch Screen Calibration
Reset
Partial Reset
All Reset
In this item, set other options.
17-10
Shows the transceiver's fi rmware version num-
ber.
Reads or writes the CS-7100 data to or from the
PC, and/or receives data from a Master trans-
ceiver.
Writes your IC-7100 (Master) data to another IC-
7100 (Sub).
Adjusts the touch screen.
Returns all settings to their default values, with-
out clearing the memory contents, call sign
memories or repeater lists.
Clears all programming and memories, and re-
turn all settings to their default values.