Break-In Function; D Semi Break-In Operation - Icom IC-7100 Instruction Manual

Previous view
6
FUNCTIONS FOR TRANSMIT

Break-in function

(Mode: CW)
The Break-in function is used in the CW mode to auto-
matically toggle the transceiver between transmit and
receive when keying. The IC-7100 is capable of Full
Break-in or Semi Break-in.
D
Semi Break-in operation
During Semi Break-in operation, the transceiver imme-
diately transmits when you key down, then returns to
receive after a preset delay time has passed after you
stop keying.
q
Select the desired frequency band. (p. 3-5)
w
On the Mode selection screen, select the CW or
CW-R mode. (p.3-??)
e
Push (C) one or more times to select the
MENU
"M-3" screen (M-3 menu).
r D) one or more times to turn ON the
Touch [BK-IN](
Semi Break-in function.
• "BKIN" appears.
t
When the "M-3" screen (M-3 menu) is selected,
touch [BK-IN](D) for 1 second to display the "BK-IN"
screen.
y Y] or [Z](D) to select the desired item.
Touch [
u
Rotate the Dial to select the desired option.
• If desired, touch [DEF](D) for 1 second to reset to the
default setting.
i
Push (C) to exit the "BK-IN" screen.
MENU
L eft D isplay R ight
C enter
Semi Break-in icon
Touch for 1 second
to reset to default
6-3
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
Touch [BK-IN]
Touch [BK-IN]
for 1 second
Shows break-in delay time