Removing The Sd Card; Removing The Sd Card While The Transceiver's Power Is On - Icom IC-7100 Instruction Manual

Previous view
13
USING AN SD CARD

Removing the SD card

q
Turn OFF the power.
w
Push in the SD card until a click sounds, and then
carefully pull it out.
D
Removing the SD card while the trans-
ceiver's power is ON
q
Push (C) to enter the Set mode.
SET
w
Touch the "SD Card" Set mode.
• If the specifi ed item is not displayed, touch [∫] or [√](D)
one or more times to select the page.
e
Touch the "Unmount" item.
• The confi rmation screen "Unmount OK?" appears.
r D).
Touch [YES](
• When the unmounting is completed, "Unmount is com-
pleted." is displayed, then the display automatically re-
turns to the screen displayed before touching [YES](D).
t
Push in the SD card until a click sounds, and then
carefully pull it out.
Front
panel
Pull out
L eft D isplay
C enter
13-5
Push
The L, R, C or D in the
R ight
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
q
q
w
●