About The Dr (D-Star Repeater) Mode - Icom IC-7100 Instruction Manual

Previous view
7
D-STAR INTRODUCTION

About the DR (D-STAR Repeater) mode

The DR (D-STAR Repeater) mode is one mode you can
use for D-STAR repeater operation. In this mode, you
can select the preprogrammed repeater or frequency in
"FROM" (the access repeater or simplex), and UR call
sign in "TO" (destination), as shown to the right.
NOTE: If the repeater, set to "FROM" (Access Re-
peater) has no Gateway call sign, you cannot make
a gateway call.
Destination
(Repeater/Station)
Access repeater
or Simplex
7-6
In the DR mode