Programming A Memory Name - Icom IC-7100 Instruction Manual

Previous view
15
VOICE TX FUNCTION

Programming a memory name

Each Voice TX memory, [T1] through [T4], can be pro-
grammed with an alphanumeric name of up to 16 char-
acters.
[EXAMPLE]: Programming the memory name "Con-
test" in [T1].
q
Push (C) one or more times to select the "M-
MENU
2" (Menu 2) screen.
• In the DR mode, select the "D1" screen.
w D) to select the Voice TX mode.
Touch [VOICE](
• "VOICE TX" screen is displayed.
e
Push (C) to display the "VOICE" screen.
MENU
r D) to display the "VOICE TX RECORD"
Touch [REC](
screen.
t
Touch the desired memory, [T1] through [T4],
second to program.
y
Touch [Edit Name] to display the "VOICE TX RE-
CORD (T1)" screen (Voice TX name edit screen).
• A cursor appears and blinks.
u
Touch the desired block one or more times to
the desired character or symbol.
Selectable characters and symbols
A to Z, a to z, 0 to 9, ! # $ % & \ ? " ' ` ^
+ – ✱ ⁄ . , : ; = < > ( ) [ ] { } ¦ _ ¯ @ (space)
• Touch "ABœ12" to toggle between the Alphabet input
and Number input mode.
• Touch [CLR](D) to delete the selected character, symbol
or number.
• Touch [SYMB](D) to open the Symbol character selec-
tion window.
• Touch "9" to input a space.
L eft D isplay
C enter
for 1
select
Memory name edit screen
Move the cursor
Input mode screen
15-4
The L, R, C or D in the
R ight
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
Touch [REC]
(Example)
Touch [T1] for
1 second.
Touch
[Edit Name].
Move the cursor
Delete a character
Select an
input mode
Enter
Cancel edit
Input a space
Touch [!"#] to
open the Symbol
character selec-
tion window.
☞
Continued on the next page.