Beta Draft Confidential
Configuring Trunks
Configuring APS Trunk Backup and Fast APS 1+1 for ATM Direct Trunks
11. When you finish, choose OK to save this configuration.
Note – If PNNI routing is configured on the switch (see
"Before You Begin" on
page
7-36), Fast APS 1+1 will be enabled once you have created an ATM NNI logical
port (including PNNI parameters) on each end of the PNNI link connection.
For more information on using the PNNI routing protocol in your Lucent network, see
Chapter 21, "Configuring PNNI Routing."
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
1/19/057-41