Lucent Technologies CBX 3500 Configuration Manual page 632

Hide thumbs Also See for CBX 3500:

Table of Contents

Configuring SVC Parameters

Configuring Node Prefixes

Table 17-10. Add SVC Node Prefix: General Tab Fields (Continued)

17-401/19/05

ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000

Beta Draft Confidential

Action/Description

Select the scope from the pull-down list. Organizational scope

defines how far into a hierarchical PNNI domain the switch

should advertise this prefix or address. Possible options are:

Intranet Site

Community - 1

Intranet Community

Community + 1

Inter Regional

Select the appropriate address format from the pull-down list

Table 17-9 on page

Select the check box if the format type is an anycast version.

Enter the address of the prefix. The format of the dialog box

will depend on the address format you selected.

For AESA formats. As you enter the address, a button is

highlighted to indicate the number of address bits that are

checked during call screening and call routing. Choose another

button to decrease the number of address bits that are checked,

thereby enabling the node to perform call screening and call

routing down to the bit level.

Show Quick Links

Chapters

Table of Contents

Cbx 500 Gx 550 B-stdx 9000