Lucent Technologies CBX 3500 Configuration Manual page 767

Beta Draft Confidential
6. To remove a policy mapping from being bound to a switch, select the policy
In a pure PNNI network, bind the policy to the calling node. In a mixed network,
between VNN and PNNI, the policy must be bound to both the gateway switch and the
calling node. However, if VNN is the calling node, the policy does not need to be
bound to the calling node.
Configure Tags on PNNI Links
Navis EMS-CBGX supports the tagging of PNNI logical links by allowing you to
associate a policy with the corresponding NNI logical port.
To link a policy with an NNI logical port:
1. Expand the Switches class node and double-click on the instance node for the
2. Perform one of the following sets of steps, depending on your configuration:
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
mapping(s) in the righthand column and choose the Unbind button. The policy
mapping(s) will be moved to the list in the lefthand column and will be unbound
from the switch.
switch on which you want to configure the PNNI logical port.
The switch object tree tab appears in the Navigation Panel.
To define the logical port for a GX 550 OC-48c/STM-16c module:
a. Expand the BIO-C card node, then expand the Subcards class node to display
the slots instance nodes.
b. Expand the slot node, then expand the PPorts class node and the PPort
instance node.
c. Expand the Subports class node, then the Subport instance node.
To define the logical port for a CBX 3500 and CBX 500 IMA modules:
Module/Configuration
DS1 (T1) 3-Port Channelized
channel DS3/1 IMA IOM
3-port Channelized
DS3/1 ATM w/IMA
Enhanced IOM
E1 channel 1-port Channelized
STM-1/E1 IMA IOM
1-Port Channelized
STM1/E1 ATM w/IMA
Enhanced
Configuring PNNI Routing
PNNI Policy-based Routing
Steps
Expand the IMA card instance
1.
node, then expand the PPorts class
node.
Expand the DS1 Channels/E1
2.
Channels class node, then the DS1
Channel/E1 Channel instance node.
1/19/0521-37