Beta Draft Confidential
7. When you complete the configuration, choose OK to save the changes and close
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Configuring ATM Over MPLS Gateway Solution on CBX 3500
Table 9-4. Add DiffServ Dialog Box Fields (Continued)
Field
E-LSP NUM PHB0
E-LSP NUM PHB1
E-LSP NUM PHB2
E-LSP NUM PHB3
E-LSP NUM PHB4
E-LSP NUM PHB5
E-LSP NUM PHB6
E-LSP NUM PHB7
the dialog box.
Description
Based on the number in the E-LSP NUM PHB field,
configure each PHB in this field. Each PHBID must be
mapped to a DiffServ forwarding class, which is then
mapped to an EXP bit on the switch. Select from the
following options:
•
DF-Drop Precedence0 – typically used for UBR/ABR
with CLP 0
•
DF-Drop Precedence1 – typically used for UBR/ABR
with CLP 1
•
AF1-Drop Precedence0 – typically used for VBR-Nrt
with CLP 0
•
AF1-Drop Precedence1 – typically used for VBR-Nrt
with CLP 1
•
AF2-Drop Precedence0 – typically used for VBR-RT
with CLP 0
•
AF2-Drop Precedence1 – typically used for VBR-RT
with CLP 1
•
EF-Drop Precedence0 – typically used for CBR with
CLP 0
•
EF-Drop Precedence1 – typically used for CBR with
CLP 1
Network-wide MPLS Settings
1/19/059-15