Lucent Technologies CBX 3500 Configuration Manual page 383

Beta Draft Confidential
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Configuring ATM Over MPLS Gateway Solution on CBX 3500
Table 9-14. Modify RSVP-TE Dialog Box Fields (Continued)
Field
RR Capable
Rapid Retransmit Interval
(MAX)
Rapid Retry Limit
(0-65535)
Bundle Outgoing Messages
Bundle Time Interval
(MAX)
SRefresh Time Interval
(MAX)
Configuring a Layer 2 Tunnel Over MPLS Core Network
This field indicates whether RSVP Refresh Reduction is
enabled on this LPort.
If enabled, Message IDs used for reliable RSVP
message delivery and message acknowledgements will
be supported. Message IDs also provide a shorthand
indication of when a message is a refresh message.
When enabled, Summary Refresh messages will also be
supported for Refresh Reduction. Summary Refresh
messages contain a list of Message IDs previously sent
on path or resv message. Each Message ID listed acts as
a refresh of the previous message. The value of the field
may be changed at any time. A change will affect
existing LSPs and any LSPs set up subsequently. This
field is disabled by default.
The interval in milliseconds before a message is first
resent if an acknowledgement is not received. The value
of the field may be changed at any time. Such a change
will take effect for subsequent messages. The default is
5000.
The maximum number of times a message is resent if an
acknowledgement is not received. The value of the field
may be changed at any time. Such a change will take
effect for subsequent messages.The default is three.
This field indicates whether RSVP Bundle Send will be
used on this LPort. This mechanism is used to bundle
outgoing RSVP messages together. This field can only
be enabled when RR Capable is enabled. This field is
disabled by default.
The maximum period (in milliseconds) that an outgoing
message may be delayed in order to build up a message
bundle.
A value of zero (0) indicates that bundle send will not
be used.
Note that all messages may be delayed by up to this
amount, and this should be taken into account when
configuring timeout values. The value of the field may
be changed at any time. Such a change will take effect
the next time the bundle send timer pops. The default is
1000.
Not available in this release.
Description
1/19/059-37