Lucent Technologies CBX 3500 Configuration Manual page 640

Configuring SVC Parameters
Configuring SVC Port Prefixes
4. If the port provides a network-to-network connection, see
5. See
6. Choose OK to save this port prefix and close the Add SVC Port Prefix dialog box.
17-481/19/05
For example, if you enter the partial address 51-43BF12AC (which uses 40 bits)
as the port prefix, but only need to check the first 38 bits of the port prefix for call
screening and call routing, select the 38 radio button.
Address you entered:
Address in binary (40 bits):
Address in binary (38 bits):
Address you entered:
Address in binary (40 bits):
Address in binary (37 bits):
Remote Gateway Address for Port Prefixes" on page 17-49
done, proceed to step 5.
Table 17-12 on page 17-53
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Beta Draft Confidential
51-43BF12AC
01010001-01000011110011110001001010111100
01010001-010000111100111100010010101111
51-43BF12A8
01010001-01000011110011110001001010111000
01010001-01000011110011110001001010111
to configure additional port prefix options.
"Setting the Local and
for instructions. When