Lucent Technologies CBX 3500 Configuration Manual page 776

Configuring PNNI Routing
Configuring PNNI Routing
21-461/19/05
Table 21-4. Add PNNI Node Dialog Box Fields (Continued)
Field
Address Sharing
Enable VNN to
PNNI
Enable PNNI to
VNN
Enable Address
Bundle
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Beta Draft Confidential
Action/Description
This parameter applies only to switches that have both VNN
OSPF and PNNI trunks.
Select the check box to advertise the VNN within the PNNI
routing domain.
Clear the check box so that the VNN is not advertised within
the PNNI routing domain. If this check box is empty for a
gateway switch, this prevents addresses from being advertised
from VNN to PNNI routing domains.
This parameter applies only to switches that have both VNN
OSPF and PNNI trunks.
Check the box to advertise the PNNI address within the VNN
domain.
Clear the box so that the PNNI address is not advertised within
the VNN domain. If this checkbox is empty for a gateway
switch, this prevents addresses from being advertised from
PNNI to VNN routing domains.
Select the check box to support bundling addresses of equal
cost into a single PNNI Topology State Element (PTSE).
Address bundling provides more efficient memory usage.
Clear the check box so that bundling addresses of equal cost
into a single PTSE is not supported.
Note: This parameter applies to all PNNI switches, whether or
not the switches support both VNN OSPF and PNNI trunks.