Lucent Technologies CBX 3500 Configuration Manual page 628

Configuring SVC Parameters
Configuring Node Prefixes
4. Configure the address and routing options using the steps on
5. Choose OK to save this node prefix and close the Add SVC Node Prefix dialog
17-361/19/05
For example, if you enter the partial E.164 AESA address 45-00000504 (which
uses 40 bits) as the port prefix, but only need to check the first 38 bits of the port
prefix for call screening and call routing (because the last two binary digits are
00), click the 38 radio button in the Bit Length field.
Address you entered:
Address in binary (40 bits):
Address in binary (38 bits):
"Defining Address and Routing Options."
box.
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Beta Draft Confidential
45-00000504
01000101-00000000000000000000010100000100
01000101-000000000000000000000101000001
page 17-38,