Lucent Technologies CBX 3500 Configuration Manual page 464

Configuring ATM PVCs
Configuring Frame Relay-to-ATM Interworking Circuits
10-501/19/05
Table 10-11. Add PVC: Administrative Tab Fields
(FR-ATM) (Continued)
Field
VCI (1..nnnn) Enter a value to represent the VCI for an ATM circuit. See
(ATM endpoint page 10-9
only, VCCs only)
When you configure the ATM circuit:
•
•
•
•
Endpoint Enter a unique DLCI for this logical port.
Connection ID:
DLCI
(Frame Relay
endpoint)
Management If you select this check box, this PVC configuration will be
Circuit included in the NMS initialization script file. This file contains all
the SNMP set requests necessary to replicate the entire switch
configuration. Once you download this file to the switch, this
PVC can be used to establish NMS-to-switch connectivity. This
option is especially useful in some management configurations.
Clear the check box to disable this feature (default).
Is Template You can save these settings as a template to configure another
(Optional) PVC with similar options. To create a template, select the check
box in the Template field. Clear the check box to disable (default).
See
information.
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Beta Draft Confidential
Action/Description
for information about setting this value.
On a Frame-based IOM, enter a value from 32 to 63.
On an ATM-based IOM (such as the ATM DS3 module), enter
a value from 32 to 255.
1-port ATM CS DS3/E3
On a
OC-3c/STM-1
module, the total number of bits available for
the VPI and VCI is 12 bits. For example, if the VPI is set to 1,
there are 11 bits available for the VCI. If the VPI is set to 2,
there are 10 bits available for the VCI.
Note: If you are configuring the VCI on a
DS3/E3 1-port ATM IWU OC-3c/STM-1
or
VCI range depends on the number of VPI bits selected on the
physical port. See the Switch Module Configuration Guide
for CBX 3500, CBX 500, GX 550, and B-STDX 9000 for
more information.
For FRF.5 network interworking, enter a value from 1 to nnn
to represent the VCI for an ATM circuit.
"Using Templates to Define Circuits" on page 10-92
1-port ATM IWU
and
1-port ATM CS
module, the
for more