Lucent Technologies CBX 3500 Configuration Manual page 643

Beta Draft Confidential
3. When done, choose OK to save this port prefix and close the Add SVC Port Prefix
4. To configure additional port prefix options, see
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Table 17-11. Add SVC Port Prefix: Gateway Tab Fields (Continued)
Field
Anycast (for Remote)
Address (for Remote)
OK
Cancel
Apply
dialog box.
Configuring SVC Parameters
Configuring SVC Port Prefixes
Action/Description
Select this check box if the format type is an
anycast version.
Enter the address of the public network gateway
used to exit from the public network back to the
private network.
Saves any changes you made in the current dialog
box, then closes it.
Closes the dialog box without saving any of the
changes you made.
Saves any changes you made in the dialog box and
leaves the dialog box open.
Table 17-12 on page 17-53.
1/19/0517-51