Lucent Technologies CBX 3500 Configuration Manual page 13

Beta Draft Confidential
Configuring Feeder Logical Ports............................................................................8-16
Configuring ATMoMPLS Trunk Logical Ports ......................................................8-34
Configuring the ATMoMPLS Trunk .......................................................................8-43
Chapter 9 Configuring ATM Over MPLS Gateway Solution on CBX 3500
ATM Over MPLS Application Overview..................................................................9-3
Network-wide MPLS Settings ...................................................................................9-7
Configuring a Layer 2 Tunnel Over MPLS Core Network .....................................9-16
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
General Attributes .............................................................................................8-18
Administrative Attributes ..................................................................................8-20
ATM Attributes .................................................................................................8-23
ATM FCP Attributes (CBX 500 and CBX 3500) .............................................8-26
QoS Tab.............................................................................................................8-28
ILMI/OAM Tab.................................................................................................8-30
NTM Tab...........................................................................................................8-32
ATMoMPLS Trunk Logical Port General Attributes .......................................8-35
ATMoMPLS Trunk Logical Port Administrative Attributes ............................8-37
ATMoMPLS Trunk Logical Port QoS Attributes.............................................8-40
ATMoMPLS Trunk Logical Port Traffic Descriptor Attributes .......................8-42
ATMoMPLS Trunking........................................................................................9-3
Layer 2 Tunnel Over an MPLS Core Network ...................................................9-3
Supported Modules .......................................................................................9-4
PWE3 Over an MPLS Core Network..................................................................9-5
Supported Modules .......................................................................................9-5
Configuring MPLS Affinities..............................................................................9-7
Configuring MPLS Tunnel Hop Lists .................................................................9-8
Configuring IntServ and DiffServ Profiles .......................................................9-10
Creating IntServ Profiles ............................................................................9-10
Creating Diffserv Profiles...........................................................................9-13
Configuring Node-based MPLS Parameters .....................................................9-17
Adding a PPP LPort ..........................................................................................9-19
General Attributes for POS LPorts .............................................................9-21
Administrative Attributes for POS LPorts..................................................9-22
QoS Attributes for POS LPorts...................................................................9-23
Trap Control Attributes...............................................................................9-26
MPLS Attributes for POS LPorts ...............................................................9-28
Congestion Control Attributes ....................................................................9-30
Point to Point Attributes .............................................................................9-31
Adding an IP LPort............................................................................................9-32
Configuring RSVP-TE on IP LPorts ..........................................................9-34
Specifying the IP Interface Address..................................................................9-38
Configuring OSPF IP Parameters......................................................................9-39
Configuring a PSN Tunnel ................................................................................9-43
General Tab Attributes................................................................................9-45
RSVP Signalling Attributes ........................................................................9-47
Configuring a Layer 2 Tunnel ...........................................................................9-51
Layer 2 Tunnel General Attributes .............................................................9-52
Layer 2 Tunnel ATM Attributes.................................................................9-54
Contents
xiii