Lucent Technologies CBX 3500 Configuration Manual page 157

Beta Draft Confidential
Table 4-4. Add Logical Port Tabs (Continued)
Trap Control
QoS
Discard/
Congestion
Mapping
OPTimum Trunk
VPI Range
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Configuring ATM Logical Ports on Frame-based Modules
Tab Name
Sets the congestion threshold
percentage in which traps are
generated, and the number of
frame errors per minute on each
logical port.
Sets the bandwidth allocation for
the available QOS classes.
Provides support for configurable
mapping of discard eligible/cell
loss priority (DE/CLP) and
forward explicit congestion
notification (FECN)/explicit
forward congestion indication
(EFCI) bits for both ingress and
egress traffic.
Specifies the VPI of an OPTimum
cell trunk.
About ATM Logical Port Functions
Description Logical Port Card Types
Type
All Frame-based
cards (see
Table 4-1 on
page 4-7)
All All
• Direct trunk
ATM CS
and IWU
• OPTimum
cards
cell trunk
• OPTimum
frame trunk
• Interworking
for FR NNI
OPTimum cell All
trunk
1/19/054-13