Lucent Technologies CBX 3500 Configuration Manual page 646

Configuring SVC Parameters
Configuring SVC Port Prefixes
Table 17-12. Add SVC Port Prefix: General Tab Fields (Continued)
Suppress Advertisement:
PNNI
Suppress Advertisement:
OSPF
Admin Cost (0-65535)
Scope
17-541/19/05
Field
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Beta Draft Confidential
Action/Description
Clearing the check box (default) allows this address to be
advertised across the PNNI routing domain if the local
switch is connected to a PNNI peer group.
Select this check box to prevent the advertising of this
address across the PNNI domain.
Clearing the check box (default) allows this address to be
advertised across the VNN OSPF routing domain.
Select this check box to prevent advertising this address
across the OSPF routing domain.
Enter the administrative cost associated with the port
prefix. When an SVC is being created, if more than one
port in the network is found with the same port prefix, the
call is routed to the port in the network that has the lowest
administrative cost associated with the port prefix.
Select the scope from the pull-down list. Organizational
scope defines how far into a hierarchical PNNI domain the
switch should advertise this prefix or address.