Lucent Technologies CBX 3500 Configuration Manual page 811

Beta Draft Confidential
3. If necessary, edit the rate profile tables as follows:
Note – It is important to create backup copies of these files in case you want to
restore the default FCP rate profile tables in the future.You might also want to use
unique filenames for your custom rate profile table files. If you choose to replace
the default filenames in the Load Rate Profile Tables dialog box
page
you are unfamiliar with the procedures for updating the
please contact the Lucent Technical Assistance Center (TAC) for more information.
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
a. Make a backup copy of the default FCP rate profile table files using the UNIX
copy command. For example:
cp /opt/Mako9.3/NavisEMS-CBGX/Database/CascadeView/
etc/cvDiscard.dat
/opt/Mako9.3/NavisEMS-CBGX/Database/CascadeView/etc/
cvDiscard.old
6-9) with your unique filenames, you can edit the
b. The file names for the default FCP rate profile tables are as follows:
/opt/Mako9.3/NavisEMS-CBGX/Database/CascadeView/etc/
cvDiscard.dat
/opt/Mako9.3/NavisEMS-CBGX/Database/CascadeView/etc/
cvCongestion.dat
/opt/Mako9.3/NavisEMS-CBGX/Database/CascadeView/etc/
cvRif.dat
/opt/Mako9.3/NavisEMS-CBGX/Database/CascadeView/etc/
cvRdf.dat
c. Edit the default rate profile tables to include your customized values and save
your edits.
d. Using the Load Rate Profile Tables dialog box
download the edited rate profile table files to the FCP. See
Buffer Threshold and Rate Profile Tables" on page 6-8
ATM FCP Rate Profile Tables
Determining FCP Rate Profile Values
(Figure 6-3 on
cascadeview.cfg
cascadeview.cfg
(Figure 6-3 on page
"Downloading
for instructions.
file. If
file,
6-9),
1/19/05D-3