Lucent Technologies CBX 3500 Configuration Manual page 473

Hide thumbs Also See for CBX 3500:

Table of Contents

Beta Draft Confidential

Table 10-12. Add PVC: Traffic Type Tab Fields (Continued)

endpoint only)

ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000

Choose the Select button to select a traffic shaper for the endpoint. Select

one of the configured shapers in the Select Traffic Shaper dialog box.

If this circuit carries ATM cell traffic, use the default of none. If this

circuit carries frame relay traffic, select one of the configured shapers.

These shapers correspond to the traffic shapers configured for the

physical port on which this logical port resides.

For information about physical port traffic shaping, see the Switch

Module Configuration Guide for CBX 3500, CBX 500, GX 550, and

B-STDX 9000.

Configuring Frame Relay-to-ATM Interworking Circuits

Action/Description

Configuring ATM PVCs

1/19/0510-59

Show Quick Links

Chapters

Table of Contents

Cbx 500 Gx 550 B-stdx 9000