Ecm - Ricoh Aficio 340 System Settings

Note
If the standby display is not
shown, press the { { { { Fax} } } } key.
B
Press the { { { { User Tools/Counter} } } } key.
Sort
1-Sided 2-Sided
2
1
1
Book 2-Sided
Staple
2
Stack
2-Sided 2-Sided
2
2
Enhanced Auto Reduce/
C
Enter the number of the "Fax".
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the number for "Key Op.
Settings" using the number keys
and press the { { { { #} } } } key within 3
seconds.
Note
If "Key Op. Settings" is not
shown, press [ Prev.] or [ Next].
E
Enter the number for "Personal
Code" using the number keys.
F
G
User Tools / Counter
ND2L01E0
H
I

ECM

If a part of a transmission fails be-
cause of a line problem, the lost data
is automatically resent. For this fea-
ture to work, the other machine must
have ECM. By default, ECM is turned
on, but you can change this with the
following procedure.
When ECM is off data transmission
speed shifts down below 14.4 Kbps
and JBIG compression is not avail-
able.
A
KEY OPERATOR SETTINGS
Enter the function number for
"Print Pers. Code" using the num-
ber keys.
Press the { { { { Start} } } } key.
When printing is completed, the
display shown in step 4 appears
again.
Note
If you press [Cancel] before
printing starts, the printing
stops and the display shown in
step 6 appears again.
Press [PrevMenu] twice.
Press the { { { { User Tools/Counter} } } } key.
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
7
171