FACSIMILE USER TOOLS
H
Select a size you want to register
using the <
[OK].
The specified size is shown on the
display.
Note
When you select "[Auto]", "---"
is shown on the display.
I
Press [Horiz.].
7
J
Enter a length using the number
keys and press [OK].
The specified size is shown on the
display.
156
< or >
<
<
> key and press
>
>
Note
Each time you press [mm
inch], the units change between
"inch" and "mm" alternately. If
you enter a length and change
the unit by pressing [mm
inch], the length is converted au-
tomatically according to the
unit (fractions are rounded off).
For example, when you enter
{ { { { 2} } } } , { { { { 5} } } } , and { { { { 0} } } } in millimeters
and change to "inch," the length
ND1X03E0
"9.8 inch" is shown on the dis-
play. If you press "mm" again
"249 mm" is displayed.
K
Press [OK].
The display shown in 6 appears
again.
L
Press the { { { { User Tools/Counter} } } } key.
Deleting an Irregular Area
A
ND1X02E8
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the { { { { Fax} } } } key.
ND1X03E0