Program-Storing Your Copy Settings In Memory; Storing Your Settings - Ricoh Aficio 340 System Settings

COPYING
PROGRAM—STORING YOUR COPY
SETTINGS IN MEMORY
You can store frequently used copy
job settings in machine memory, and
recall them for future use.
2

Storing Your Settings

You can store your settings you
frequently use.
Deleting A Program
You can delete a stored program.
Recalling A Program
You can recall a stored program.
Note
You can store up to ten programs.
Paper settings are stored based on
paper size. So if you place more
than one paper tray of a same size,
the paper tray prioritized with the
user tools will be selected first. See
"12. Pap.Tray Priority" of the Sys-
tem Settings.
Programs are not cleared by turn-
ing the power off or by pressing
the {Clear Modes/Energy Saver} key.
They are canceled only when you
delete or overwrite them with an-
other program.
Storing Your Settings
A
Edit the copy settings so that all
functions you want to store in this
program are selected.
B
Press the {Program} key.
Program
eed Dial 1
çí
Clear Modes / Interrupt
C
Energy Saver
2 3
ND2R01EE
C
Press the [Store] key.
D
Select the program number you
want to store these settings in
with the <> keys. Then, press
the [OK] key.
When the settings are successfully
stored, the m indicator appears.
Note
Program numbers with m al-
ready have settings in them.
If this program number is al-
ready being used, the machine
will ask you if you wish to over-
write it - press the [Yes] or [No]
key.
ND2C0101
ND2C0109