Reading The Display; Standby Display; Communication Display - Ricoh Aficio 340 System Settings

GETTING STARTED

READING THE DISPLAY

The display tells you the machine sta-
tus and guides you through opera-
1
tions.
Note
Functions that have been selected
are hilighted as shown (
Keys that you can not select are
shown with a dashed outline
(
All procedures in this manual as-
sume you are in Fax mode. By de-
fault, when you turn the machine
on it is in Copy mode. Press the
{ { { { Fax} } } } key change to Fax mode.
You can have the machine start in
Fax mode. See "Changing the Ma-
chine's Settings" of the System Set-
tings.

Standby Display

While the machine is in the standby
mode (immediately after it is turned
on or after the { { { { Clear Modes/Energy Sav-
er} } } } key is pressed), the following dis-
play is shown.
10
11 17
).
Memory Transmission
).
Immediate Transmission
Note
To return the machine to standby
mode, perform one of the follow-
ing:
• If you have set an original and
are in the sending process, re-
move the original.
• If you have not set an original
and are in the sending process,
press the { { { { Clear modes/Energy
saver} } } } key.
• If you are in User Tools mode,
press the { { { { User Tools} } } } key.

Communication Display

While the machine is communicating
the status is displayed.
Display during Memory Transmission
or Memory Reception:
Note
Even when the machine is sending
or receiving a fax message from/