Setting Originals In The Document Feeder - Ricoh Aficio 340 System Settings

COPYING
Setting Originals In The
Document Feeder
Note
Do not stack originals above the
limit mark.
2
When copying thin originals (41 –
2
52 g/m , 11 – 14 lb), select [DF Set-
ting] and set to Thin Paper mode,
or set your originals on the expo-
sure glass to avoid damage due to
a multi-sheet feed (if several sheets
are fed together at the same time).
See P.35 "Thin paper mode".
The original might become dirty if
it is written with a pencil or similar
tools.
For 1-sided originals, you can se-
lect the ADF tray or the ADF exter-
nal tray as an output tray. See "22.
ADF Orig. Ejection" in the System
Settings.
1: ADF tray
2: ADF external tray
Copying or scanning speed might
be a little reduced if the ADF tray is
selected as an output tray.
Reference
Regarding originals that the docu-
ment feeder can handle, see
"Originals".
êë
1 2
ND1D04EE
P.20
Setting a stack of originals in the
document feeder
A
Adjust the guide to the original
size.
B
Set the aligned originals face up
into the document feeder.
1
1: Limit mark
2: Document guide
Note
To avoid a multi-sheet feed,
shuffle the originals before set-
ting them in the document feed-
er.
When SADF mode is selected
Reference
See P.33 "SADF mode".
A
Set one original face up into the
document feeder. Then, press the
{Start} key.
The Auto Feed indicator is lit.
B
Set the next original while the
Auto Feed indicator is lit.
2
ND1D01EE