Transmission Features; Stamp; Id Transmission - Ricoh Aficio 340 System Settings

Ricoh facsimile operating instructions
Hide thumbs Also See for Aficio 340:
Table of Contents

Advertisement

SENDING A FAX MESSAGE

TRANSMISSION FEATURES

Stamp

Optional Stamp Unit is required
2
When sending a fax message using
the Document Feeder (ADF), the ma-
chine can stamp a circle mark at the
bottom of the original. When sending
a double sided document, they are
marked at top and bottom side on the
front page. This stamp indicates that
the original has been successfully
stored in memory for Memory Trans-
mission, or that it has been successful-
ly sent for Immediate Transmission.
Limitation
Stamp only works when scanning
from the Document Feeder (ADF).
When you select the ADF internal
tray, Stamp does not work.
While scanning the document, you
cannot switch stamp on or off.
Do not open the document feeder
(ADF) while scanning the docu-
ment. Document jam should occur.
Note
When the Stamp Unit installed,
{ { { { F5} } } } key is automatically assigned
as the Stamp key.
52
A
A
ND0X01E0

ID Transmission

This feature allows you to restrict
transmission of messages only to ma-
chines of the same make, and only to
those machines that have the same
Polling ID. The transmission options
let you switch ID transmission on and
off for each separate transmission.
When the stamp starts getting
lighter, replace the cartridge.
P.220 "REPLACING THE STAMP
CARTRIDGE"
If a page was not stamped even
though the Stamp feature is turned
on, you need to re-send that page.
By default, Stamp is turned off. If
you use this feature often, you can
adjust the User Parameters so that
the home setting is on. In this case,
Stamp can easily be turned off for
any single transmission by press-
ing the { { { { Stamp} } } } key.
"Changing the User Parameters"
Press the { { { { F5} } } } key.
nicating
File
File
Start
TEL
TX File
Manual RX
Status
Mode
F1
F2
F3
01
02
03
The Stamp indicator will light.
Pressing the { { { { F5} } } } key again will
turn Stamp off.
Note
The default setting is off. Turn this
feature on with the User Parame-
ters.
P.203 "Changing the User
Parameters"
P.203
De
Su
F4
F5
04
05
06
ND2L04E2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aficio 350Aficio 450

Table of Contents