Ricoh Aficio 340 System Settings page 447

Note
If "Key Op. Settings" is not
shown, press [ Prev.] or [ Next].
E
Enter the function number for
"Authorized RX" using the num-
ber keys.
F
Enter the function number for
"Delete Sender" using the num-
ber keys.
G
Choose the sender to delete by en-
tering its code. The RTI/CSI will
flash up.
Note
If you make a mistake, press
{ { { { Clear/Stop} } } } and enter a correct
number.
H
Press [Yes].
Note
If you press [No], the sender is
not deleted and the display
shown in 7 appears again.
I
Press [Yes].
The sender is deleted.
Note
If you press [No], the sender is
not deleted and the display
shown in 5 appears again.
J
Press [PrevMenu] 3 times.
K
Press the { { { { User Tools/Counter} } } } key.
Sender/Authorized Reception List
Print this list to find out which Specif-
ic Senders are currently programmed.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
ND1X03E0
shown, press the { { { { Fax} } } } key.
B
Press the { { { { User Tools/Counter} } } } key.
Sort
Staple
Stack
Enhanced
KEY OPERATOR SETTINGS
1-Sided 2-Sided
2
1
1
Book 2-Sided
2
2-Sided 2-Sided
2
User Tools / Counter
2
Auto Reduce/
ND1X03E0
7
ND2L01E0
191