Ricoh Aficio 340 System Settings page 353

C
Enter the "Transfer Request"
function number with the num-
ber keys.
Note
If the appropriate display is not
shown, press [ Prev.] or [ Next].
D
Enter a Transfer Stations and
press [Recv. Stn].
Note
Enter the fax numbers of the
Transfer Stations with either
Quick Dials, Speed Dials or the
number keys.
If you make a mistake, press the
{ { { { Clear/Stop} } } } key and try again.
To cancel the Transfer Request,
press[Cancel] . The Transmis-
sion Mode menu is shown
again.
E
Enter one or more End Receivers.
Note
You cannot enter the numbers
of the End Receivers directly.
The numbers must be stored in
Quick Dials, Speed Dials or
Groups in the Transfer Sta-
tion(s). To specify an End Re-
ceiver, use the special format
described in
an End Receiver".
Press [Add RcvStn] if you wish
ND1X03E0
enter more End Receivers.
Press < or > to see the End Re-
ceivers already entered. You
can select an End Receiver from
this list and cancel it by pressing
the { { { { Clear/Stop} } } } key.
To cancel the Transfer Request,
press [Cancel].
F
When you have specified all the
End Receivers, press [OK].
G
If you want to enter an additional
Transfer Station, press [Yes] and
repeat steps 4 to 6.
ND1X03E0
If you press [No], the Transmission
Mode menu is shown and a check
mark is added to Transfer Request.
H
Press [Exit].
TRANSFER REQUEST
P.98 "Specifying
ND1X03E0
4
97