If You Cannot Make Clear Copies - Ricoh Aficio 340 System Settings

IF YOU CANNOT MAKE CLEAR COPIES

Problem
Copies appear dirty.
The reverse side of an orig-
inal image is copied.
A shadow appears on cop-
ies if you use the pasted
originals.
The same copy area is dirty
whenever making copies.
Copies are too light.
Parts of the image are not
copied.
Copies are blank.
IF YOU CANNOT MAKE CLEAR COPIES
Cause
The image density is too
dark.
Auto Image Density is not
selected.
The image density is too
dark.
Auto Image Density is not
selected.
The image density is too
dark.
The exposure glass, platen
cover, or document feeder
belt is dirty.
The image density is too
light.
Damp or rough grain pa-
per is used.
Toner cartridge is almost
empty.
The original is not set cor-
rectly.
An improper paper size is
selected.
The original is not set cor-
rectly.
Action
Adjust the image density.
P.37 "Adjusting Copy Im-
age Density".
Select Auto Image Density.
Adjust the image density.
P.37 "Adjusting Copy Im-
age Density".
Select Auto Image Density.
Adjust the image density.
P.37 "Adjusting Copy Im-
age Density".
Change the direction of the
original.
Put mending tape on the
pasted part.
Clean them. P.169 "Main-
taining Your Machine".
Adjust the image density.
P.37 "Adjusting Copy Im-
age Density".
Use dry paper without
rough grain.
P.121 " D
Add toner.
Adding Toner".
Set originals correctly.
P.31 "Setting Originals".
Select the proper paper
size.
Set originals correctly.
P.31 "Setting Originals".
3
113